SkyTraxx SKYTRAXX 2.0, Руководство пользователя

Страница: 25 / 32

_________________________________________________
Page 25
Menu choice
USER FIELDS
Three user-definable fields (see pg. 8) can be set to any of the
parameters in the list below.
To change the parameters in these fields, select USER FIELDS
from the menu by pressing OK . Select the field to be changed and
then select the desired parameter from the list.
The following choices are available:

Time - actual time

Flight time - time since start of logging

AGL - height above ground ( only if the suitable HGT file exists in
the ELEVATION folder )

AGL (feet) - height above ground in feet ( only if the suitable HGT
file exists in the ELEVATION folder )

Altitude – GPS height(AMSL)

Altitude (feet) GPS height(AMSL) in feet

Relative altitude - height relative to take-off

Altitude gain – cumulative height gained during whole flight

Flight level .

Pressure – QNH (in hPA)

Course over Ground – track being travelled

Distance to Waypoint - distance to next selected waypoint

Distance to Airspace - distance from nearest airspace

Distance to Airspace vertical

Distance to take off – distance from point of take-off

Distance from track – distance from intended path

Battery level

Empty Field – leaves field blank

Barogram – Cross-sectional picture of height vs time/track.

Glide ratio

Race start – time set on race-start timer

Alt of arival

G-force (if sensor is installed)