LED DISPLAY
POWER CONNECTION
Plug the AC power cord to an outlet. This unit is equipped with a battery backup system, it
requires a 3V CR2032 flat lithium battery (not included). Insert the battery in the battery
compartment, making sure that the positive and negative (+ and
-
) battery terminals are
attached to the corresponding terminals on the base in the battery compartment. If an AC power
failure occurs, the clock automatically switches to the battery power supply, in which the clock
and timer memory continue running. When the AC power resumes, the clock switches back to
AC power once again.
GETTING STARTED
TIME AND CALENDAR MANUAL SETTING
Setting the Time and Calendar
–
Press the CLK.ADJ.TEMPERATURE button (11) in normal
mode and keep it pressed for 2 seconds to enter into the time set mode. Once inside the setting
mode, press the CLK.ADJ.TEMPERATURE button (11) to change the mode cycle as follows:
Normal
→
Year
→
Month
→
Day
→
12/24 H
→
Real time Hour
→
Real time Min
→
Normal
Action (during data adjustment):
-
Press the << / Tune
-
button (2) to adjust data backward.
-
Press the >> / Tune + button (10) to adjust data forward.
-
Press and hold the << or >> buttons for 2 seconds to enable auto forward.
-
Use Clock ADJ. (11) button to confirm each setting.
SETTING THE ALARM
Setting Alarm 1 and Alarm 2
–
Press the alarm set button (1/7) during normal mode and keep it
pressed for 2 seconds to enter into the alarm setting mode. Once in the setting mode, press the
alarm set button (1/7) to change the mode cycle as follows:
Содержание SY-1034
Страница 1: ......
