21B-2L, 429 - 1 Nonhyun-Dong, Namdong-Gu, Incheon, Korea
T. +82-32-821-4731~5 , F. +82-32-821-4736 , E-MAIL. [email protected]
Trouble Shooting
The tail wing does not move at all when you turn on the switch of the body.
- Check if the battery pack is connected correctly
- Check if the servo cable is connected to receiver correctly
- Battery protection circuit may be out of order due to short circuit, etc.
☞
Call for dealer
- If the problem is not resolved after you check above things, it is probable that the
electronic speed controller is out of order
☞
Call for dealer
When you turn on the switch of the body, the tail wing quickly moves to certain
position but No BEEP sound and you cannot fulfill the setting procedure.
- Check if the transmitter is turned on
- Check if the batteries in the transmitter have enough power
- Check if the antenna is extended to its full length
- Check if the crystals are the same frequency band on both receiver and transmitter
- Check if both crystals are compatible to the receiver and transmitter
- Check if the motor and Receiver/ESC are connected correctly
- Check if the electric cable is securely welded to the motor back side
- If the problem is not resolved after you check above things, it is probable that the
crystal in the receiver is damaged.
The wing flapping frequency is lower than normal.
- Check if the battery is fully charged (Fully charged : ~8.4V)
- Check if the gearbox is damaged or deformed due to crash or other impacts
- Check if you can rotate the gears smoothly with your hand
- Check if the gearbox is stained with dust or any other foreign objects
20
