FRONTPANEL
1.
MIC VOLUME:
Volume control of the microphone
2.
OUTPUT METER:
VU-meter with LED as indicators for the strength of the output signal.
3.
EQUALIZER
5-band EQ
4.
POWER
On/Off
5.
CUE VOLUME:
The CUE VOLUME ROTARY KNOB adjusts your headphone monitor output volume
6.
SWITCH STEREO / MONO
7.
MASTER VOLUME FADER
This fader will allow you to adjust the master volume of the unit
8.
SOUND EFFECTS SECTION
Eight different sound effects ( ALIEN, APPLAUSE, SIREN, CROAK, GLASS
，
SCREAM
，
CROWD & BIRD) may
be added to your mixer by pressing the SOUND EFFECTS CONTROL BUTTONS. The volume of the effects can
be adjusted using the rotary VOLUME located the right side under the BIRD effects buttons.
9.
SPEED:
Sound effect speed adjustment
10.
VOLUME:
Sound effect volume adjustment
11.
CROSSFADER SELECTION:
Crossfader selection for Channel 3 or Channel 4
12.
CROSS-FADER:
Slide for step less cross-fading from one to another assigned channel.
13.
CROSSFADER SELECTION:
Crossfader selection Channel 1 or Channel 2
1.
INPUT SELECTOR
2.
CHANNEL VOLUME FADER
Channel fader will allow you to adjust the volume for that
particular channel selected.
3.
CHANNEL CUE SELECTOR SWITCH
The button allows you to choose which channel you wish to
monitor in your headphones by pressing the buttons down.
4.
CHANNEL EQ-HIGH
The rotary knobs allow you to adjust the High frequency of
the channel input.
5.
CHANNEL EQ-LOW
The rotary knobs allow you to adjust the Low frequency of
the channel input
Содержание STM-2290
Страница 2: ......
