Wall Mounting or Using the Stand
The clock unit has a built in stand you can flip open to support the unit on a flat surface.
You can also close the stand and mount the unit on a wall. Drive a screw into the wall
until the head extends about 1/8 inch from the wall, then locate the keyhole slot over the
screw head and slide the SkyScan Atomic Clock down to make it secure.
Trouble - Shooting
Press the "Reset" button when the clock is displaying irrelevant time even when
the tower icon shows. This may happen when the external noise is severe enough
to interfere with the time signal.
Care of your clock
Avoid exposing your clock to extreme temperatures, water or severe shock.
Avoid contact with any corrosive materials such as perfume, alcohol or cleaning
agents.
Do not subject the clock to excessive force, shock, dust, temperature or humidity.
Any of these conditions may shorten the life of the clock.
Do not tamper with any of the internal components of this clock. This will
invalidate the warranty and may cause damage.
Correct usage of the batteries
Use 3 new "C" alkaline batteries (not included)
Do not mix standard or rechargeable batteries
Do not mix new and old batteries
When the low battery icon appears on the display, replace the batteries with
appropriate ones.
