ADJUSTING THE DISPLAY BACKLIGHT
This clock radio features an adjustable display backlight with dim, medium and bright
settings. To select a backlight setting, press the SNOOZE/DIMMER button until the
brightness is reached. This setting can only be selected when the radio is not playing.
Note: Please note the always-on backlight will not work while the clock is operating
on battery power.
SETTING UP ANTENNA
1.
An AM antenna is built-in to the unit; rotate the unit as needed for best AM
reception.
2.
Open the battery cover at the bottom case, extend the FM wire antenna fully and
vary the direction for best FM reception. Do not strip, alter or attach to other
antennas.
TUNING AND PLAYING THE RADIO
1.
Press SLEEP/RADIO once to turn on the radio, the clock display will show
“ON” and flashes.
2.
Press AM/FM to select AM or FM band.
3.
Repeatedly press or - at the front ring to tune into a desired radio station.
To scan the stations, press and hold the + or - for a few seconds and release. The
radio will search and stop on the next strong station.
Note: Keep your radio away from fluorescent lamps, which may cause
interference to the radio.
4.
You may also use the MEMORY function to select a preset radio station. See the
USING THE MEMORY SET FUNCTION.
5.
Rotate the VOLUME dial to adjust the volume level.
6.
Press SNOOZE/DIMMER button to turn off the radio.
