The free “Charge Master” software gives you unparalleled ability to operate the charger
through the computer. You can monitor pack voltage, cell voltage and other data during
the charging, view charge date in real-time graphs. And you can initiate, control charging
and update firmware from “Charge Master”.
You need to disable synchrony mode in order to using “Charger Master” software. The
Charger Master” software can support one channel only.
In order to connect the charger to the computer and use the “Charge Master”, you are
required to use a USB cable which is not included in this package. The cable must be
terminated on one end with “A” plug and the opposite end is terminated with “micro-B”
plug which can connect to charger directly.
The “Charge Master” can be download from www.skyrc.com.
USING THE CHARGE CONTROL SOFTWARE “CHARGE MASTER”
Ultimate Duo 1400W
·
22
CHARGE MASTER- FREE PC CONTROL SOFTWARE
