General Operation
04
03
3S LiPo
Battery
Connect battery to the goggle.
Input voltage is 7-18V and recommended
2-4S LiPo. (Battery is NOT INCLUDED)
Press and hold power/band
button for
3
seconds to
turn it ON.
Power ON the System
Frequency Auto Search
Press and hold search/channel button
for 3 seconds to start the auto search.
It takes around 20 seconds to identify
the channel. Auto search will stop if the
frequency is found.
Change Frequency Manually
Press
SCAN
/
CH
button
once
to change
the frequency.
Press
BAND
button
once
to change
the
band
.
Channel Searching...
Select
Input
Source
Press
SOURCE
button
once
to
select input source
.
Input Souce
RECEIVER
HDMI IN
AV IN
Select
Press
or to select
.
and Press to
confirm.
Volume Control
Press + button to increase volume
Press
-
button
to
decrease volume
Standard earphones can be used with the
goggle.
OK
A: Signal Source: Built-in 5.8G RECEIVER / AV IN / HDMI IN
B: Battery Voltage for FPV GOGGLE
C: Selected Frequency
D: Signal Intensity A
E: Signal Intensity B
1 RECEIVER Battery 15.6V Freq(GHz): 5925 SignalA: 104 SignalB: 99
A
B
C
D
E
General Operation
