background image

IMPORTANT SAFETY INSTRUCTIONS

INTRODUCTION

Your eFUEL switching DC Power Supply is designed to use mains electricity to power equipment that requires 
DC power. The eFUEL converts standard household power 100-240V AC to 12-18V DC power and can supply 
up to 30 amperes of continuous power.

Thank  you  for  purchasing  the  eFUEL  30A  Switching  DC  Power  Supply.  We  are  confident  that  you  will  be 
delighted with its performance because our Switching DC Power Supply is designed and manufactured by skilled 
professionals using the highest standard in workmanship.

Dual  DC  output  ports  are  converted  from  banana  connectors  to  XT60  battery  connectors.  It  gets  more 
convenient  &  safe  for  charging  the  most  popular  battery  with  XT60  connector  and  avoid  the  possibilities  of 
reverse polarity.

FEATURES

OPERATION

INSTRUCTION MANUAL

30A SWITCHING DC

POWER SUPPLY

SK-200013

1

2

Power 
Switch

Do Not 
Cover

!

Ventilation Fan

INPUT

100

-

240V

 

AC

AC Power 

Input

Power
Switch 

Cooling
Fan

Current & Voltage 
Readout 

Voltage Adjustment Dial (12V-18V)

Dual DC 
Output

USB Power
5V / 1A

Cooling
Fan

* Two DC power outputs, up to 30 amperes
* Output voltage of adjustable 12-18V
* Large LCD indicates voltage and current output
* Two USB ports, 5V/1000mA total for MP3 player, mobile phone, and digital cameras
* Smart cooling fan
* Over-temperature protection
* Overload protection
* Short circuit protection
* Overvoltage protection

Ensure that the power switch is OFF before connecting to the mains power socket. If the switch is ON, 
your Power Supply may be damaged due to power surges.

Adjust the voltage by rotating the dial according to the loads. ( 12-18V)

Connect  the  loads.  Please  check  the  current  of  loads  should  not  exceed  30  amperes.  When  the 
current is over 30A, the Overload protection procedure will be activated. The Power Supply will cut off 
the DC output and indicate "OCP" on the display. If you want to reset your Power Supply, TURN OFF 
the Power Supply, reduce the loads after "OCP" disappear, then TURN ON.

Caution: Remove the output connections after use.

Caution: Place your power supply in a well ventilated open, and cool area. Do not block the fan 
on both sides.

Caution:  Your  power  supply  might  cause  TV  or  radio  interference  even  when  it  is  operating 
properly. To check whether your power supply is the reason causing the interference, turn off 
your power supply. If the interference goes away, your power supply is causing it.

Try to eliminate interference by:

Keep distance between the power supply and TV or radio.
Connect the power supply to an outlet on a different electrical circuit from the TV or radio.
Contact a qualified technician for help.

1.

2.

3.

Warning:  To  reduce  the  risk  of  fire  or  electric  shock,  carefully  follow  all  the  instructions.  This  manual 
contains  important  safety  and  operating  instructions  for  this  power  supply.  Before  you  use  the  power 
supply, read all the instructions and cautions markings in this manual of the power supply and the product 
that you will connect to the power supply to reduce the risk of injury:

Do not use the power supply near water (for example, a bathtub, washbowl, kitchen sink, laundry tub, 
wet basement, or swimming pool).

Do not place the power supply on an unstable cart, stand or table. If the power supply falls, it could 
injure a person or cause severe damage to the power supply.

Do not overload power outlets or extension cords. An overload can result in fire or electric shock.

Do not disassemble this unit; take it to a qualified service technician when service or repair is required. 
Improper reassembly may result in a risk of electric shock or fire.

Do not use an attachment not recommended. This could result in a risk of fire, electric shock, or injury 
to persons.

Never  push  any  object  into  the  slot  in  the  power  supply.  It  could  touch  dangerous  voltage  points  or 
short-out parts resulting in a fire or electrical shock.

Caution: To reduce the risk of damage:

Do not operate the power supply if it has been dropped or damaged in any way. Please take it to a 
qualified service technician for repair.

The power supply should be operated only from a standard AC outlet that provides 100-240V, 50-60 
Hz. If you are not sure of the type of power supplied to your home, consult your local utility company.

Отзывы: