This gauge's accuracy is astonishing. Tests have shown a tolerance of up to 0.2
degrees across a 3-degree range, which is commonly adopted for touring cars.
Every single Camber and Toe Gauge is tested and calibrated before delivery.
You can use this gauge on any angle setup station as the Zero function allows
it to zero to any angled surface you are working on. Zero it on your setup
station before use, and you will have accurate measurements throughout the
day!
We guarantee this product to be free of manufacturing and assembly defects
for a period of one year from the time of purchase. The warranty only applies
to material or operational defects, which are present at the time of purchase.
During that period, we will repair or replace free of service charge for products
deemed defective due to those causes.
This warranty is not valid for any damage or subsequent damage arising as a
result of misuse, modification or as a result of failure to observe the procedures
outlined in this manual.
Note: The warranty service is valid in China only.
If you need warranty service overseas, please contact your dealer in the first
instance, who is responsible for processing guarantee claims overseas. Due to
high shipping cost, complicated custom clearance procedures to send back to
China. Please understand SkyRC can't provide warranty service to overseas end
user directly.
If you have any questions which are not mentioned in the manual, please feel
free to send email to [email protected]
Input Voltage: 5V
Input Current: 200-300mA
Interface: Type C
Working Voltage: 3.4-4.2V
Working Current: <10mA
Size: 45×12×80mm
Weight: 53g
Low-voltage Protection: <3.4V (Flashes Red)
Measuring Range: ±17.5°
Measuring Accuracy: ±0.2°
Working Temperature: 0°C-50°C
Working Humidity: 5%-90% (None-condensation)
Storage Temperature: -10°C-50°C
Storage Humidity: 1%-75% (None-condensation)
- 3 -
2022.04
7504-1648-01
SPECIFICATIONS
WARRANTY AND SERVICE
MEASURE TOE
Hold the car kit vertically on
the setup station
Hold the gauge against the wheel, and
read the value through the app, with
peace of mind achieving a very accurate
measurement of toe-in and toe-out.
1
2
Camber Gauge
ZERO
HOLD
o
o
0
o
10
o
5
o
15
o
-10
o
-5
o
-15
o
3.5
80%
Turn Off
Toe-in
No Toe
Toe-out
Remark: More toe-out increases oversteer!
Digital
Camber Gauge
for 1/10 Touring Car
