01 - Lid
02 - Bowl
03 - Motor Support Flange
04 - Motor Housing
05 - Base
06 - ON/OFF Switch
07 – Bowl Flange
08 – Speed Control Knob
09 – Pulse Switch
01
1. Introduction
1.1 Main Safety Precautions
The High Rotation Blenders Mod. TA-04 GOURMET are machines simple
to operate and to clean .
To avoid accidents read the following instructions :
1.1.1
Before cleaning or maintenance unplug the machine from electric
source .
1.1.2
Never use tools not belonging to the machine to help operation .
1.1.3
Before to switch ON the machine , be sure the Bowl No.02 (Pic.01)
is stable on its position .
1.1.4
Never throw water directly on the machine .
1.1.5
Never switch ON the machine with wet clothes or wet feet .
1.1.6
1.1.7
Read with attention item 3.1.
Always operate the blender on a clean and dry surface to avoid the
motor to suck dust or water
1.2 Main Components
All components are made with carefully selected materials for their
function, in accordance with the Siemsen standard testing procedures and experience .
Picture - 01
08
07
01
02
03
05
08
06
04
09
Electrical or mechanical maintenance shall be made by qualified
persons .
The maintenance responsible shall be sure the machine is working in
TOTAL SAFETY conditions .
4.7 Advices
5.1 Problems Causes and Solutions
5 Problem Analysis and Solutions
The High Rotation Blender has been designed to need a minimum
maintenance . However some problems may arise due to normal wear during the machine
life .
If some problem arises with your High Rotation Blender , check table 2 ,
where some possible solutions are recommended .
Table - 02
Problems
Causes
Solutions
* Electric shortage .
* Check if the machine
plug is into its socket ,
and if there is electric
energy on the network .
* The machine does not
Start.
* The Bowl is leaking.
* The product does
not blend
* Problem with the sealing
system
* Product to big , the
knife does not touch it .
* Knife not sharpened.
* C a l l T e c h n i c a l
Assistance
* C a l l Te c h n i c a l
Assistance
* Cut the product into
smaller pieces .