Skymsen LVS-1,5-N, Инструкция по эксплуатации, Страница: 5 / 16

5
TABLE 01
CHARACTERISTIC UNIT LVS-1,5-N
Voltage V 127 ó 220 *
Frequency Hz 50 / 60
Power Rating CV 0,5
Consumption kW/h 0,38
Height mm 430
Width mm 205
Depth mm 210
Net Weight kg 4,7
Gross Weight kg 5,5
Cup Maximum Capacity L 1,5
1.3 Características Técnicas
(*) Voltage will be only the one indicated on motor characteristics label.
2. Installation And Pre Operation
2.1 Installation
The Blender should be installed on a clean and stable surface with a preferentially height
of 850mm.
This equipment was developed to be used at 127 Volts or 220 Volts (50 Hz / 60 Hz).
Before starting the machine, check the voltage on the label existent on the cord. The
voltage shall match the electricity network voltage.
The cord has a three round pins plug , one of them is ground . It is mandatory that the
three pins shall be duly connected .
2.2 How to assemble the Blender Cup
2.2.1 – Put Rubber Sealing Ring Nº 01 on Central Bearing Nº 02, Pic. (02)
2.2.2 – Fit the Central Bearing Nº 02 and the Rubber Sealing Ring Nº 01 on the Cup Base
Nº 03, Pic. (02)
2.2.3 – Screw the Cup Nº 4 on the Cup Base Nº 03, Pic. (02).
IMPORTANT
Metalúrgica Siemsen is NOT RESPONSIBLE for any damage caused when using NOT
ORIGINAL spare parts.