02
4. Operation:
(1) The adjustment of the train net: Before shipment we have adjusted well
the train net. But after some times operation, you can adjust by yourself if necessary.
You can loose the bolt by the shaft and move the bearing base to adjust the train net.
(2) Turning on the power and press down the power switch”1”and the lamp is
on. Turning the thermostat switch”4”clockwise to the required temperature and the
heating lamp is on and the up and down heaters are heating and the toaster
temperature is increasing. When the temperature increases to the required
temperature, the thermostat will cut off the power automatically and the heating
lamp is off and the heaters stop working. When the temperature is down, the
thermostat turns on the power automatically, the heaters work again, In this
circulation, the temperature is kept in the setting range.
(3) Before bakery, heat the toaster for 12 min. first, then try to bake 2 pieces
of bread slices and adjust the temperature according to the toasting color of the bread
slices. If you need color dark, turn the thermostat switch wise to
over”2”position.After adjustment, put the bread slices on the train net and the bread
slices are shipped into the toaster for bakery.
(4) After bakery, the bread slices will be shipped to the bottom container and
will be shipped to the front via the bottom container. If you like to take them from the
back, you can press down the sliding trail to make it fixed to the pole by the train
wheel. The baked bread slices will be shipped into the back container. After
operation, you can put the sliding trail back.
(5) After operation, please turn counter clock wise the thermostat in the
original position and cut off the power.
WARNING: NEVER PUT THE FLAMMABLES ON THE TOASTER
WHEN WORKING!
Содержание Fleetwood CT-300
Страница 2: ......
