Dough Roller - Model CLM-300/300L
Index
01
Instruction Manual
1.Introduction_______________________________________02
1.1 Safety__________________________________________02
1.2 Main components_________________________________02
1.3 Technical Characteristic____________________________03
2. Installation and Pré-Operation_________________________03
2.1 Installation_______________________________________03
2.2 Pre-operation____________________________________04
2.3 Proceedings for feeding_____________________________05
3. Regular Operation__________________________________05
3.1 Switching on_____________________________________05
3.2 Dough thickness control____________________________06
3.3 Cleaning________________________________________06
4. General Safety Rules________________________________08
4.1 Basic operational practice___________________________08
4.2 Precautions and remarks before switching on the machine__09
4.3 Routine Inspection_________________________________10
4.4 Operation_______________________________________10
4.5 After work is done__________________________________11
4.6 Maintenance Operation_____________________________11
4.7 How to proceed in case of EMERGENCY________________11
4.8 Warnings________________________________________12
5. Problem Analysis and Solutions________________________12
5.1 Problems, causes ands solutions______________________12
6. Electrical Diagram__________________________________13
The electrical and mechanical maintenance has to be performed by
skilled personnel. The person in charge has to be sure that the machine is
under perfect working and safe conditions before it is switched on.
The CLM-300/300L Dough Roller was designed to need minimum
maintenance however some performance failures may occur due to
operational wearing.
Please refer to Table- 02 below in which the main possible
problem/solution situations are described.
Besides the Company is ready to assist you through your Dealers as well
as the Company Technical Assistance network.
4.8 Warnings
5.1 Problems, causes and solutions
Table - 02
12
*Deregulated scrapers
* Rollers stop during
operation
*on/off button with bad
contact
*Cord or outlet with bad
contact
*No power
*Check if machine is
plugged in outlet
* Call technical
assistance
*Check if cord is in
perfect conditions,
check the pins of the
plug
5. PROBLEMS ANALYSIS AND SOLUTIONS
*The laminated product
got stuck in between the
rollers
* Call technical
assistance
