Install Kit #1
1.
Activate your m2500 using mazu app or
https://www.skymate.com/mseries
2.
Install the Base Unit
(do not connect power until Step 4).
3.
Install the Keypad.
4.
Install the Smart Antenna with an
unobstructed view of the sky.
5.
Connect the Base Unit to power (within
minutes all indicators should be green).
6.
Wi-Fi connect your UI device to
the Base Unit.
7.
Launch mazu or login with a browser
at mseries.online.
Base Unit (ISI-2000)
Power Cable (2m)
+
+
Smart Antenna (IGT-2100) with 10m cable
+
Install Kit #2
+
What’s in the m2500 box?
Quick Start
Install Kit #3
Keypad (KPD-100) with Keypad Cable (2m)
2
3
1
iPad and Apple are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Wi-Fi is a
register trademark of the Wi-Fi Alliance. mazu is a trademark of SkyMate, Inc., registered in the U.S., Canada and other countries.
©2017 SkyMate, Inc. All rights reserved.
SkyMate, Inc.
100-11890 Sunrise Valley Drive
Reston, VA 20191, USA
Toll-free: 1-866-SkyMate
Phone: 1-703-961-5800
Email: [email protected]
www.mazu-marine.com
Quick
Start
Guide
Power
Smart Antenna
Keypad
Self-installation Disclaimer
This product is designed to be DIY installable. It is your responsibility to determine if you have the knowledge, skills and
physical ability required to properly perform an m2500 installation. SkyMate shall have no liability for damage or injury
resulting from the installation or use of any SkyMate products.
Warning
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.
