Parts Included
When unpacking your system make reference of your SCID on the bottom of your SkyMate Communicator
You will need this to activate your SkyMate.
1)
SkyMate
I
Series Communicator
2)
Power Cable
3)
Y-Cable
4)
SOS Pad
5)
Iridium/GPS Antenna
6)
20 foot Antenna Cable
7)
SMA to SMA pigtail
Hardware Installation
1.
Select a location for your SkyMate communicator
Your SkyMate communicator should be installed in a dry, well-ventilated area
close to a power source.
2.
Select a location for your Iridium/GPS antenna
The antenna must be installed within 20 feet of your SkyMate communicator
The antenna must have a clear view of the sky
3.
Install SOS pad into dash
4.
Connect to power (12v to 24v)
Red to positive
Black to negative
White to shield. If not shield then white can also be connected to negative
1)
4)
6)
2)
5)
3)
7)
