
18
Step 4: Aligning the Satellite Antenna
The sat antenna can be aligned using the SAT FINDER or the receiver‘s software menu . We recommend antenna
alignment via the sat finder. Connect the sat finder to the LNB and the receiver supply line according to the sat
finder‘s operating instructions.
Slowly move the antenna eastwards/westwards while continuously monitoring the signal strength display (tone
pitch). Tighten the clamp bolts once the maximum signal level has been reached, thus restricting lateral antenna
movement.
Optimise the antenna‘s elevation angle by moving it up or down until the maximum signal level is displayed. Since
the sat finder displays a signal for each and every satellite, please use the sat receiver to check whether the
located satellite is really the right one. Subsequently tighten the clamp bolts without changing the settings.
See elevation table on the inner rear cover!
Outdoor installation has now been completed.
Содержание SFA60
Страница 22: ...20...