VI-2. Channel Search
A. Satellite Name
Press the
button to display the Satellite List Box. The Satellite name
list is put in alphabetical order. Select one of the preprogrammed satellites
that correspond to the value of the antenna. If the desired satellite name is
not in the list, then select Others.
B. Search Mode
There are 4 search modes. Auto, Manual, Advanced and SMATV. The Auto
mode enables to search using the information the DVR has. On the other
hand, there will be a need to know in advance the frequencies and the
symbol rates before using the Manual mode. On the Advanced mode, enter
the Audio PID, Video PID or the PCR PID. The SMATV mode is used to special
purpose an satellite master antenna TV.
C. Frequency
Enter the Transponder Frequency by using the numeric button on your RCU.
D. Symbol Rate
Enter the Transponder Symbol Rate by using the numeric buttons on your RCU.
E. Polarization
Choose the type of polarization, either the Horizontal or the Vertical.
F. Network Search
This Network Search item can be used if the Search mode is set to the Manual
or Auto mode. If the Network Search item is set to ON and the NIT (Network
Information Table) is available, the Transponder information can be found.
G. PID
Press
button to enter Video, Audio and PCR PID.
Video PID – Insert the Video PID by using the numeric buttons on your RCU.
Audio PID – Insert The Audio PID by using the numeric buttons on your RCU.
PCR PID – Insert the PCR PID by using the numeric buttons on your RCU.
SAVE – To ensure the above Video, Audio and PCR PID change, press
button at this item.
H. FTA/Scrambled
Choose your favorite channels among FTA only, CAS only and FTA+CAS.
I. Tuner Select
Select a tuner for channel searching from the selected satellite.
J. Start Search
Searches for digital channel after the configuration of the LNB is over. To stop
the searching process an the way, press either the
button or the
button. This menu will be shown as long as the DVR is searching for chan-
nels. All channels found will be listed in two collumns on the screen; with TV
channels in one collumn and Radio channels in the other. Please note that
the search procedure may take a few minutes. When the search procedure
is completed, the screen will show how many TV and Radio channels have
been found. Press
button to save the channels.
K. LNB Setting
To go to LNB Setting menu directly from Channel Search menu, press
button at this item.
67
9. Main menu
39746
39745
39746_BDA_0604_eng #38 29.06.2004 14:22 Uhr Seite 67
