01/04/2019
5/6
E_MH_Mounting_instructions_Skylux_Cintralux_safety_grids _1200_Joule
Extra U-clip: only in case of small barrel vaults (span of max. 1.5 m).
Install the U-clips with the self-drilling screws as indicated.
Bottom side:
After installing the safety grids, you can continue installing the barrel vault.
Please note: reinforcement profiles are no longer necessary after the installation of safety grids.
Warnings
Installers: installation must be performed by trained technicians with sufficient knowledge of and experience in
the installation of barrel vaults.
Original parts: only use original parts and install them according to the assembly instructions.
Skylux reserves the right to modify this product or these instructions without prior notice. Changes to the
assembly instructions or to the product carry no right to compensation or exchange of parts. The most recent
version of these instructions can be consulted at any time at www.skylux.be.
Safety during assembly
Take the necessary and required safety precautions, such as safety nets in the roof opening(s), fall protection,
protection of the roof edge, safety shoes, safety goggles, gloves, hard hat, etc.
Maintenance: carry out an annual inspection on the safety grids. Check for any defects, corrosion, … and replace
the damaged parts.
4th opening
