SkylinkHome
TM
Dimmable Receiver Module
Model: MD-318
Preliminary Manual
1. Introduction
Thank you for your purchase of a SkylinkHome
TM
Dimmable Receiver Module, Model MD-318. This
receiver allows you to wirelessly turn on or off, dim and brighten the lighting fixtures.
The Dimmable Receiver Module MD-318 can communicate with up to 8 transmitters so user has the
option to add more transmitters to the system.
The following items are included in this package:
-
One Dimmable Receiver Module
-
Screws and Accessories
-
User’s Instructions
CAUTION
Installation is required and enclosed instructions must be followed carefully to all steps and notes. If you
are uncertain or uncomfortable performing this installation, please consult a qualified electrician. This
manual should also be retained for future reference.
2. Installation
1. Turn off power to the circuit at the circuit breaker of the lighting fixture that you plan on Plug-In
Lighting Module.
WARNING:
Failure to turn off power at the circuit breaker can result in electrical shock causing severe or fatal injury.
The Dimmable Receiver Module is designed to operate maximum load of 300W at 120VAC, 60Hz.
2. Follow the diagrams below to install the Dimmable Receiver Module with the 3 wires: Neutral,
Live and Load. Use the provided screws to secure the Dimmable Receiver Module.
3. After all the wires are connected, ensure that all of the wire connectors are attached securely and
there should be no exposed copper wiring. Straighten the antenna.
