Instructions
1. Place the face frame (A) face down on a flat
working surface to ensure that the face is not
scratched or damaged (Figure 1)
2.
Installing the side panels: (Figure 2) Insert right and
left side panels (B) into the groovese of the face frame
(A) and align the cam lock connectors (Figure 2). Lock
the cam with a screwdriver by turning the screw 180 de-
grees clockwise (Figure 4)
3. Installing the top & bottom panel (Figure 3) Gently spread
the side panels and insert the bottom & top into the
grooves of the side panel (B) until it touches the face frame
(A) . Align it and lock each cam.
F
4
4. Installing the Back Panel & Toe Kick: (Figure 5) Before
you start this step put the back panel ( E) on a flat sur-
face facing upward. Install the drawer rail holders (L) in
the pre
-
drilled area on the back panel (Figure 6) The
opening of the holders should be facing towards each
other. Secure them with (2) rounded head screws.
(Figure 6) Then put the back panel ( E) at rear of side
panel. (B) Align and lock each cam lock. Install the Toe
Kick (G) by locking the cam lock at both ends.
