4 |
P a g e
2. SETUP
The Skylift framekit consists of the following :
1. Main carbon fiber body
2. Battery straps x 2
3. 4 x assembled arms
–with speed controllers and motors . 2 x yellow , 2 x black
4. Landing legs with adjustable skids
5. 4 x APC 15 x 8 E top props
6. 4 x APC 15 x 10 EP bottom props
2.1.1 ASSEMBLY
Remove Skylift X8 800 from its transport package.
Slide Leg set until it clicks into position on center frame.
To release legs press locking lever up and slide legs off.
Insert arms by
ensuring cam latch “ 0 “ marking lines up with locking pin on frame. Push arm into frame and
turn cam latch clockwise until it clicks indicating locked position. To unlock the arm turn cam latch anti-
clockwise and pull the arm outwards.
2.1.2 BATTERIES
Maximum capacity of 6s is allowed. We recommend 2 x 6s 10 000 mah for best performance.
Load batteries and secure in place with battery straps.
2.1.3 PROPELLERS
A maximum size of 17 “ propellers can be used on this system.