Skylab M&C Technology Co., Ltd
Module SKB369
SKB369-DA-001,A/1
be used as an analog wakeup source from System OFF or System ON. The comparator threshold can
be programmed to a range of fractions of the supply voltage.
5.2.8 Reset
The reset pin of the SKB369 module is in the internal pull-high state , when the reset pin of the
module is input to a low level , the module will be automatically reset .After the reset pin is used , the
parameters of the current setting will not be ANT .
5.2.9 NFC
The NFC peripheral (referred to as the 'NFC peripheral' from now on) supports communication signal
interface type A and 106 kbps bit rate from the NFC Forum.
With appropriate software, the NFC peripheral can be used to emulate the listening device NFC-A as
specified by the NFC Forum.
Listed here are the main features for the NFC peripheral:
• NFC-A listen mode operation
• 13.56 MHz input frequency
• Bit rate 106 kbps
• Wake-on-field low power field detection (SENSE) mode
• Frame assemble and disassemble for the NFC-A frames specified by the NFC Forum
• Programmable frame timing controller
• Integrated automatic collision resolution, CRC and parity functions
SKB369 Pin Number
Pin Number
Description
16
P0.09
Digital I/O; NFC1
17
P0.10
Digital I/O; NFC2
Table5-4: ADC Pins
Bluetooth Module
