Skyjack SJ45T Скачать руководство пользователя страница 38

Страница: 38 / 106

It is the responsibility of the operator to read, completely understand and follow all instructions and warnings

contained in this operating manual and on the aerial platform.

AMILIARIZA

TION

• Test Oscillating Axles

WARNING

DO NOT

operate any control on

platform control console without proper
fall protection secured to designated
location in platform. Failure to avoid this
hazard could result in death or serious

injury!

1. Extend fly boom 12 in. (30 cm) while on a

firm level ground.

Result:

The steer axles should be locked.

2. Drive one of the steer tires up onto a

6 in. (15 cm) block or curb.

Result:

An appropriate tilt of the aerial

platform chassis should occur.

3. Retract fly boom while in tilt position.

Result:

The steer axles should unlock and

the aerial platform chassis should level
itself to ground.

• Test Cables (61T/66T)

1. Raise the main boom to approximately

horizontal.

2. Extend and retract the boom sections.

Result:

There should be no delay in the

movement of the fly boom section.

Oscillating Axle Locked

Oscillating Axle Unlocked

Page 38

SJ 40T & SJ 45T

SJ 61T & SJ 66T

Function Tests

Section 2 - Familiarization

Содержание SJ45T











































































































Результаты поиска

Содержание SJ45T

Отзывы:

Похожие инструкции для SJ45T

Бренды по названию

Популярные бренды

Skyjack SJ45T, Руководство по эксплуатации

Результаты поиска

Содержание SJ45T

Отзывы:

Похожие инструкции для SJ45T

Бренды по названию

Популярные бренды