Skyjack SJ40 T+, Руководство по эксплуатации

Страница: 48 / 130

213201ACA SJ40 T+, SJ45 T+, SJ61 T+, SJ66 T+
48
Section 4 – Inspections Before Operation Visual and daily maintenance inspections
4.2-8 Platform assembly
Do the inspection that follows in sequence:
WARNING
Fall hazard. Use the three points of contact
principle when you enter or exit the platform. If
you do not obey, there is a risk of death or serious
injury.
1. Enter the platform and close the gate or drop
bar.
2. Close the gate.
1
Platform railings
▪
Make sure there are no loose or missing parts,
and there is no visible damage.
▪
Make sure the fasteners are correctly installed.
▪
Make sure the platform railings
1
are in the
correct position.
▪
Make sure the gates or drop bars
2
are in
good condition and operate correctly.
3
Fall-protection anchorages
▪
Make sure that the fall-protection anchorages
are correctly installed.
▪
Make sure there is no visible damage.
4
Footswitch
▪
Make sure the footswitch is in good working
order and has not been tampered with,
disabled or blocked.
5
MEWP floor
▪
Make sure the MEWP floor is solid and there is
no visible damage.
6
AC power socket
▪
Make sure that the socket is free of dirt or
blockages.
7
Platform control console
▪
Make sure all switches and controllers are in
the neutral position.
▪
Make sure there are no loose or missing parts,
and there is no visible damage.
8
Manual storage box
▪
Make sure that the operation manual and
other important documents are in the manual
storage box.
▪
Make sure that the documents are in good
condition, and you can read them.
▪
Always put the manuals and other documents
back in the storage box after use.
3. Exit the platform.
4
1 6
2
3
3
7
8
5