Skyjack SJ 7127 Скачать руководство пользователя

Страница: 15 / 84

Page 16

Mid Size & Full Size RTs

Engine Powered

Visual & Maintenance Inspection

Section 2 - Familiarization

It is the responsibility of the operator to read, completely understand and follow all instructions and warnings

contained in this operating manual and on the aerial platform.

2.3 Visual & Daily Maintenance

Inspections

Begin the visual and daily maintenance inspections
by checking each item in sequence for the conditions
listed in this section.

WARNING

To avoid injury, do not operate an aerial
platform until all malfunctions have been

corrected.

WARNING

To avoid possible injury, ensure aerial
platform power is off during your visual

and daily maintenance inspections.

NOTE

While doing visual and daily inspections
in different areas, be aware to also inspect
limit switches, electrical and hydraulic

components.

2.3-1 Labels

Refer to

Section 5- Labels

in this manual and determine

that all labels are in place and are legible.

2.3-2 Electrical

Maintaining the electrical components is essential
to good performance and service life of the aerial
platform.

Inspect the following areas for chafed, corroded and
loose wires:

•

base to platform cables and wiring harness

•

engine compartment electrical panel

•

engine wiring harness

•

hydraulic/electrical wiring harnesses

2.3-3 Limit Switches

Ensure limit switches are properly secured with no signs
of visible damage and movement is not obstructed.

2.3-4 Hydraulic

Maintaining the hydraulic components is essential
to good performance and service life of the aerial
platform.

Perform a visual inspection around the following
areas:

•

hydraulic tank filter, fittings, hoses, emergency
power unit (if equipped) and base surfaces

•

engine compartment fittings, hoses, main
pump, and filter

•

all hydraulic cylinders

•

all hydraulic manifolds

•

the underside of the base

•

ground area under the aerial platform

•

outriggers

2.3-5 Emergency Lowering Access Rod

(All models except 9250)

Ensure rod is properly secured and there is no visible
damage.

Model 71xx

Model 88xx

Outrigger

Platform
Assembly

Limit Switch

Platform Control
Console

Base

Scissor
Assembly

Base

Electrical/Hydraulic
Compartment

Ladder

Electrical/Hydraulic
Compartment

Ladder

Limit Switch

FAMILIARIZA

TION

FAMILIARIZA

TION

Содержание SJ 7127





















































































Результаты поиска

Содержание SJ 7127

Отзывы:

Похожие инструкции для SJ 7127

Бренды по названию

Популярные бренды

Skyjack SJ 7127, Руководство по эксплуатации

Результаты поиска

Содержание SJ 7127

Отзывы:

Похожие инструкции для SJ 7127

Бренды по названию

Популярные бренды