1.
To connect in Network Mode,
Click the ‘Device Connections’ icon
at the
bottom of the SkyTrak app dashboard. (Image 1, page 5)
2. Select Network Mode
(Image 2, page 5)
3.
The app will then ask you to connect directly to the unit. This is necessary
in order to program your home network credentials onto the SkyTrak unit.
Tap the Home button on the iPad, go to settings, and connect to the
SkyTrak unit in the Wi-Fi list.
(Image 3, page 5)
4. Return to the app
, where it will connect to the unit and all 3 lights will
turn green.
5.
Next you will be taken to the screen where you will
enter your network
credentials
.
(NOTE: The SkyTrak unit
WILL NOT
be able to connect to your
home network if there are any special characters (!, #, $, etc.) in either your
network name or your network password. Please edit the network name
and/or password to remove special characters before proceeding. Also, the
network name and password are case sensitive so pay close attention as
you enter them.)
(Image 4, page 5)
Your security type is most likely WPA2.
6. Click Connect
and the SkyTrak unit will reset itself.
7. The SkyTrak hardware light indicators
will go
through a series of color cycles:
•
Middle light flashing red
Looking for a network
•
Middle Light flashing yellow
Has found a network
•
Middle light solid yellow
Has successfully connected to the network
Содержание Skytrak
Страница 1: ...Network Connection Guide...
Страница 7: ......
