7
Using a Charging Key to charge a Spout
z
Charging the Charger:
A full charger can charge approximately 1.5 Skyflo Spouts.
The Charging Key should be fully charged before charging a Spout.
Plug in the Charging Key and wait for the “Charger” red light to go out.
However the charger can feed the spout meanwhile it is getting charged.
z
Before charging Spout:
Press the Key button once to activate and place the Key on the Spout.
Light reference;
“Charger” LED Green
=
Key battery OK;
“Charger” LED Red
=
Key battery empty.
z
During charging:
When the key is placed on a Spout the key will detect how much power is present.
It continues to detect every 1 to 3 minutes during the charging process.
(When key is detecting spout the “Spout” LED blinks green once.)
