Overview
This document provides integration, installation and usage instructions for the
SkydioLink 5GHz Radio (FCC 2ATQRSMO5GV1 / IC 25280-SMO5GV1).
Module Integration
Pinout & power requirements
All module power and control signals are passed from the end device to the
module over J9800, following the below pinout:
Detail on pin-out requirements:
Pin Number
Required Signal
Purpose
1, 3, 5, 7
5V (780 mA minimum) 5V Supply for RF front end modules
2, 4, 6, 8
3.3V
3.3V Supply for Switcher & QCA617A
9
Unused GPIO
10
1.8V Supply for QCA6174A
21
Unused GPIO
25
Unused GPIO
27
SDIO Data (0) from Host to WiFi
29
SDIO Data (1)) from Host to WiFi
31
SDIO Command from Host to WiFi
32
SDIO Data (2) from Host to WiFi
33
WiFi enable signal from Host
34
SDIO Data (3) from Host to WiFi
35
-
test point
36
SDIO Clock from Host to WiFi
11 - 20, 23, 23, 26, 28, 30, 37 - 40
-
Ground
