SKYDANCE T11-1, Руководство пользователя

Страница: 5 / 5

Touch Panel work as RF remote (two match ways)
Use the controller’s Match key
Match :
Short press match key, immediately press Zone
key of the touch panel.
Use Power Restart
Match :
Switch off the power of the receiver, then switch on power again,
immediately short press Zone key 3 times on the touch panel.
The light blinks 3 times means match is successful.
.
Delete
:
Switch off the power of the receiver, then switch on power again,
immediately short press Zone key 5 times on the touch panel.
The light blinks 5 times means all matched remotes were deleted.
Delete
:
Press and hold match key for 5s to delete all match,
The light blinks 5 times means all matched remotes
were deleted.
End user can choose the suitable match/delete ways. Two options are offered for selection:
Wiring Diagram for touch panel work as RF remote
L N
INPUT
85-265VAC
AC85-265V
GND D+ D-
DMX OUTPUT
T11-1/ T12-1/T13-1
T14-1 / T15-1
Malfunctions analysis & troubleshooting
Causes Troubleshooting
1
.
No power
.
2
.
Wrong connection or insecure
.
1
.
Check the power
.
2 . Check the connection .
1. DMX decoder first address error.
2
.
Wrong connection of output wires.
1 . Check the DMX first address.
2
.
Reconnect output wires.
Wrong color
Malfunctions
No light
User Manual Ver 1.0.4
www.iskydance.com Page 5
T11 - 1 , T12 - 1 , T13 - 1 , T14 - 1 , T15 - 1 Wall Mounted Touch Panel