●
Enter stand-alone dimmer mode only
when DMX
signal is disconnected or lost.
●
Short
press
MODE
key, when
display
L
-
1~L
-
8, enter
stand
-
alone
dimmer mode.
●
Press
◀
or
▶
key
to change dimmer mode number(L
-
1~L
-
8).
●
Each
dimmer
mode
can
adjust
each
channel
brightness
independently.
Short press SETUP key to switch between 4
channel(100~1FF, 200~2FF, 300~3FF, 400~4FF).
Press
◀
or
▶
key to setup brightness
value of each channel.
Long press SETUP key for 2s, or timeout 10s, quit setting.
Stand-alone dimmer mode
(
L
-
1
~
L
-
8
)
Stand-alone RGB/RGBW mode
●
Enter stand-alone RGB/RGBW mode only
when DMX
signal
is disconnected or lost.
●
Short
press
MODE
key, when
display
P01~P30, enter
stand
-
alone
RGB/RGBW mode.
●
Press
◀
or
▶
key
to change dynamic mode number(P01~P30).
●
Each
mode
can
adjust
speed
and
brightness.
Short press SETUP key for switch between mode speed,
brightness and W
channel
brightness setting.
Press
◀
or
▶
key to setup value of each item.
Mode
speed:
1-10
level
speed(S-1, S-9, S-F).
Mode
brightness:
1-10 level
brightness(b-1, b-9, b-F).
W
channel brightness: 0-255 level brightness(400-4FF).
Long press SETUP key for 2s, or timeout 10s, quit setting.
Speed
(
8 level
)
Brightness
(
10 level
,
100
％)
(
P01
~
P30
)
Stand-alone dimmer mode
Stand-alone RGB/RGBW mode
●
Short press MODE key, when display 001~999, enter DMX mode.
●
Press
◀
or
▶
key to change DMX decode start address
(001~999),
long
press
for fast
adjustment.
●
If there is a DMX signal input, will enter DMX mode automatically.
●
DMX Dimming: Each D4-WP DMX decoder occupy 4 DMX address
when connecting the DMX console.
For example, the defaulted start address is 1,
their corresponding relationship in the form:
DMX mode
DMX mode
(
001
~
999
)
CH1 0-255
CH2 0-255
CH3 0-255
CH4 0-255
CH1 PWM 0-100% (LED R)
DMX Console
DMX Decoder Output
CH2 PWM 0-100% (LED G)
CH3 PWM 0-100% (LED B)
CH4 PWM 0-100% (LED W)
User Manual Ver 1.0.2
Page 3
www.iskydance.com
D4-WP 4 Channel Constant Voltage Waterproof DMX512 & RDM Decoder
