To flip drone, press Tumbling Key, use joysticks to direct drone and rotate 360 degrees.
How to Insert and Change Batteries
Place the controller on a flat surface with its backside facing up to expose the screw near the center of the device.
To remove the screw, use a Phillips head screwdriver (Figure 1).
Do not throw away the screw.
Gently remove the backing of the device.
Using a pointed edge, gently remove the 4 x AA batteries.
To replace the new batteries, insert each battery into the terminal, aligning with each ‘+’ and ‘-’ symbol (Figure 2).
If batteries are too big, do not attempt to force batteries into device.
To reattach the backside of the device, align the backpiece onto the device.
To close device, place the screw into the hole from which it was originally removed.
Use a Phillips head screw driver to tighten the screw.
1.
2.
3.
4.
5.
6.
7.
8.
Figure 1
Figure 2
Battery Care
Where possible, recycle batteries or dispose in nearby recycling or collection program.
Store unused batteries in original packaging, in a dry place, and at normal room temperature.
Keep all batteries away from children and pets.
Caring Information
Your controller is only intended for flying the HD Drone. Do not attempt to adjust or modify unit.
If unit needs cleaning, first remove batteries. Wipe with damp cloth. Do not attempt to clean with liquid cleansers or submerge in water.
Technical Specifications
Dimensions
160 x 120 x 35 mm
Color
Black
Weight
122 g
Battery Type
4x AA batteries (Batteries not included)
Tumbling Key
Headless mode
One-key-return
Adjustment of each trim
If the drone is moving on its own while flying, you may need to adjust the trims.
Turn Left/ Turn Right
Turn
Left
Turn
Right
Forward/ Backward
Forward
Backward
If the drone is rotating by itself:
If it rotates to the right, move the left joystick to the left to correct
the trim as it’s taking off.
If it rotates to the left, move the left joystick to the right to correct
the trim as it’s taking off.
If the drone is moving left/right by itself:
If the drone flies strafes (flies sideways) to the right, move the
right joystick to the left to correct the trim as it’s taking off.
If the drone flies strafes to the left, move the right joystick to
the right to correct the trim as it’s taking off.
If the drone is moving forward/backward by itself:
If it flies forward, move the right joystick down to correct the trim as
it’s taking off.
If it flies backward, move the right joystick up to correct the trim as
it’s taking off.
1.
3.
2.
Left-side flying/
Right-side flying
Fly
Left
Fly
Right
Headless mode / One-key-return function:
When the drone is flying forward, press the Headless Mode key to allow it to fly freely, regardless of direction.
Press the One-Key-Return button to hover again.
Troubleshooting During Flight
The device complies with the European Directives 2014/53/EU.
At the end of its service life, this product may not be disposed of in the
normal household waste, but rather must be disposed of at a collection
point for recycling electrical and electronic devices. The materials
are recyclable according to their labelling. You make an important
contribution to protecting our environment by reusing, recycling, or
utilizing old devices in other ways. Please ask the municipal administration
where the appropriate disposal facility is located.
Subject to change.
Situation
After batteries are loaded into the drone,
the lights keep flashing but there is no
reaction from the controller.
When taking off, the engine fails to start
and the lights start flashing on the drone.
Main rotor spins but the drone is unable to
take off.
Drone is vibrating.
Drone continues to fly forward on its own,
even after adjusting the trim as outlined
above.
After falling, the drone has lost its balance
and cannot fly.
No response after battery is connected to
drone.
The controller has failed to make a
successful connection with the drone.
Drone batteries are depleted.
1. Deformed propellers.
2. Drone batteries are depleted.
Deformed propellers.
Gyroscope needs recalibration.
Gyroscope needs recalibration.
1. Check that both the drone and the
controller are both powered and that the
batteries are sufficiently charged.
2. Ensure the “+” and “-” orientation are
correct for the batteries.
Turn both devices off and on again and
try connecting the drone again.
Fully charge the battery, or replace with a
fully charged battery.
1. Replace propellers.
2. Fully charge the battery, or replace
with a fully charged battery.
Replace propellers.
You can adjust the controller to the
Auto-calibration Mode or restart it and
re-configure the calibration manually.
You can adjust the controller to the
Auto-calibration Mode or restart it and
re-configure the calibration manually.
1. Switch on the power of the controller
and make sure the batteries inside the
controller are secure and charged.
2. Load the batteries once again, please
confirm if the contact between the battery
and the “+” “-” battery plates are correct
or not.
1
3
5
2
4
6
7
Cause
Way to deal
