skybox S9 HD PVR, Руководство пользователя, Страница: 8 / 28

8
8
2.
Basic Operations
2.2 Power
2.1 Turn on STB
1 Press [Power] Key can enter the Standby state
First, press the [Device
’
s Main Power] to turn on the 2 In Standby state, press [Power] Key again can call
Unit. back the unit and go on play the previous channel
When the STB is first used, there will play the first
3 User can also disconnect the device
’
s main power
channel from the default Channel List. If the STB is not to end the Standby state.
first used, STB will play the same channel as last time
before turning off.
2.3 Channel Up/Channel Down
?
Frequently Asked Question In full screen, press [CH+/CH-] to change channel.
Q: The power of my STB has been turned on and
2.4 Volume Up/Volume Down-
not in Standby mode, but the TV screen showed In full screen, press [VOL+/VOL-] to adjust volume.
nothing:
2.5 Number
A: Make sure the TV set has been set to the correct In full screen, use number key and press [OK] on the
video input (not the TV channels). For example, if you Remote Control Unit to change channel.
have connected the unit with the Video1 input of the TV
2.6 Mute
set, the TV set has to be switched to Video1. 1 Press [MUTE] key to mute the sound and the
Q: The power of my STB has been turn on and not screen will show up mute OSD.
in Standby mode, but the TV screen showed 2 Press [MUTE] key again to restore sound.
nothing except
“
one ball with No Signal image
”
.
A: That means the channel, which you select, is no
2.7 Pause
signal. It could be several causes: 1 In playing mode, press [Pause] key, the picture
1 The channel which you select is not in your will be paused, but the sound of the channel will
allocate satellite. The simply solution is to change still continues.
Channel.
2 Press [PAUSE] key again, the screen
’
s picture will
2 The signal of current TV channel is too weak. You skip over to the current playing picture, and the
can try to change channel to other strong signal sound of the channel will corresponding playing.
channels. If the problems still exist, please consult
your local dealer or other professionals for
2.8 Recall
technical service. Press [RETURN] key will directly switch to the previous
3 You use the Dual LNB, and you need Modify LNB channel that you played before current channel.
Type
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn