Skybox version 10.1.200
12
Chapter 3
This chapter explains how to set up Skybox Appliance.
In this chapter
.......................................................... 12
................................................... 12
.......................................................... 13
........................................................................ 15
Hardware installation
Before you start
Before installing the rack mount kit, observe these safety guidelines:
1
Turn off all peripheral devices connected to Skybox Appliance.
2
Turn off Skybox Appliance by pressing the Power button on the front of the
chassis and then unplug the AC power cords from the chassis or wall outlet.
3
Label and disconnect all peripheral cables and all telecommunications lines
connected to I/O connectors or ports on the back of the chassis.
4
Provide electrostatic discharge (ESD) protection by wearing an antistatic wrist
strap attached to a chassis ground—any unpainted metal surface—when
handling components.
Required tools and supplies
›
Phillips (cross head) screwdriver (#1 bit and #2 bit)
›
(Recommended) Antistatic wrist strap and conductive foam pad
Installation
To install your Skybox Appliance, refer to the installation instructions included
with the rack mount kit.
Starting Skybox Appliance
To start the Appliance
1
Connect the AC power cords to the AC connectors on the Appliance back panel
and connect the other ends to a power supply.
Note: You can use Skybox with either a 110- or 220-volt power supply.
Setting up Skybox Appliance
