Skybox version 11.7.100
11
Chapter 3
Setting up Skybox Appliance
This chapter explains how to set up Skybox Appliance.
In this chapter
Available Installation Processes
Hardware installation
Warning: These Appliance models include high wattage and high clock speed CPUs. Failure
to maintain an ambient operating temperature of 27° C (80° F) or lower voids the
manufacturer’s warranty.
Before you start
Before installing the rack mount kit, observe these safety guidelines:
1. Turn off all peripheral devices connected to Skybox Appliance.
2. Turn off Skybox Appliance by pressing the Power button on the front of the chassis and
then unplug the AC power cords from the chassis or wall outlet.
3. Label and disconnect all peripheral cables and all telecommunications lines connected to
I/O connectors or ports on the back of the chassis.
4. Provide electrostatic discharge (ESD) protection by wearing an antistatic wrist strap
attached to a chassis ground—an unpainted metal surface—when handling components.
Required tools and supplies
l
Phillips (cross head) screwdriver (#1 bit and #2 bit)
l
(Recommended) Antistatic wrist strap and conductive foam pad
Installation
To install your Skybox Appliance, refer to the installation instructions included with the rack
mount kit.
