Skybox Appliance 5500 Quick Start Guide
Skybox version 8.5.400
20
Support tab
Pane
Description
Logs
Enables you to view Server, Collector, and other logs of
the Appliance.
Get Packlogs: Runs the
packlogs
utility and saves the
packlogs (ZIP) file to a local directory so that you can
send the file easily to support.
Skybox Manager Enables you to download the Manager for installation.
Setting up SNMP configuration
To use the Appliance as an SNMP Server
1
On the System tab, click SNMP.
2
Select Enable SNMP Service.
3
Set the following values.
•
On the General tab:
—
System Location: physical location of the Appliance
—
Contact Details: email address of administrator
•
On the Security tab:
—
Read Only Community: SNMPv1 or SNMPv2 community string
—
Source: Name or IP address / subnet, represented as IP/MASK
(10.10.10.0/255.255.255.0) / IP/BITS (10.10.10.0/24).
Multiple sources must be comma-separated
•
On the Notification (Traps) tab:
—
Destination: Name or IP address of the notification receiver traps
server
—
Traps Community: SNMP community of the notification receiver traps
server
4
When you are finished, click Save SNMP Configuration to save the
configuration and update the service with the new configuration.
Setting up network interface bonding
Skybox Appliances support network interface bonding for redundancy and also
for higher bandwidth.
To create a network interface bonding
1
On the Network tab, click Network Configuration.
2
Select Network Interfaces.
3
Select an interface that you want to add to a network bond and click Add to
Network Bond.
The Network Bond Setup dialog box appears.
