ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
SkyBound, a Fuloo, LLC Company.
SkyBound is a registered trademark of Fuloo, LLC
in the U.S. and other countries. All logos, names,
characters, likenesses, images, slogans and
packaging appearance are the property of SkyBound.
PLEASE KEEP THIS MANUAL AS IT CONTAINS IMPORTANT INFORMATION
Always enter the enclosure only through the door of the net.
High winds increase the chance of a trampoline with
enclosure being blown over. Always secure your trampoline
by using an anchor kit. Adequate overhead clearance is
essential. A minimum of 24 ft from the ground level is
recommended. Provide clearance for wires, trees, and other
obstacles. It is recommended for at least 2 able bodied
adults to setup the trampoline net.
While every attempt is made to ensure the highest degree of
quality and protection in all equipment, we cannot guarantee
complete exemption of injury. The user assumes all
responsibility of injury due to use of this equipment. All
merchandise is sold on this condition, and all equipment is
used at the consumers risk.
Always inspect your trampoline and enclosure before each use
and regularly replace any worn, defective, or damaged parts.
IMPORTANT SAFEGUARDS
LIABILITY
TRAMPOLINE PAD
x1
CARE AND MAINTENANCE
ATTACHING THE PAD
Remove your old pad by
detaching the ties attached to
the trampoline frame at the
bottom of the pad. Remove your
new pad from the box and lay on
top of your trampoline atop the
exposed springs.
Using the straps sewn into the
bottome of the pad, attach the
pad to your trampoline. Attach
the bungee straps towards the
inside of the trampoline to the
closest v-rings of your jumping
mat. Attach the bungee straps
towards the outside of the
trampoline to the outside of
frame rail by wrapping the
straps and tying them together.
Once fully attached, pull the skirt
of the safety pad over the frame
and ensure the pad completely
covers the trampoline springs
and frame.
View from under trampoline