SkyBest 8004, Руководство пользователя

Страница: 24 / 65

X80XX Digital Video Recorder User Manual…………………………………………………v1.3
- 23 -
AUTO RESET: When switch is on, you can setup the time for device to restart.
SYSTEM UPDATE: Copy the update file to the root directory of the flash disk, and insert it into USB groove,
then press [Enter] to upgrade the firmware, and it will display the process of the system upgrading, picture is
below:
DEFAULT SETTINGS: Restore all the settings as the factory setting.
NOTE: make sure that the U drive and power is steady when it is upgradeing.
17 PTZ SETUP
Move the cursor to
【
PTZ SETUP
】 （
Icon highlighted when selected
），
press
【
Enter
】
to enter into setting interface,
you can setup the parameters for each channel separately. With direction key or move cursor to the option, and
press [Enter] to switch different channels.
CHANNEL: The channel of PTZ connected.
PROTOCOL: select the protocol of different PTZ, there are two protocols to switch, and the default is Pelco-D
BAUD RATE: select the different baud rate for your PTZ, there are 1200, 2400, 4800, and 9600
DATA BIT: there are 5,6,7,8 options to select, default setting is 8.
STOP BIT: 1 and 2 are optional, the default setting is 1.
VERIFY: there are None/Odd/Even/Mark/Space to select, the default setting is none.