SkyBean SkyDrop, Руководство пользователя, Страница: 3 / 20

important note
– please read
SkyDrop is in silent mode after start-up, so if you want to hear vario
sound, select
FTime widget and manually start the flight by long
press. This feature will help you to be nice to other pilots before take-
off. By default, the sound will be enabled automatically after take-
off. To disable this function, please uncheck
Suppress audio
checkbox in Settings>Logger>Auto start/land menu entry.
operation of the SkyDrop variometer
During startup animation, firmware version in bottom left and
hardware revision in bottom right corner are shown. The device will
start on the last used home screen. You can
scroll between home
screens by pressing the left or the right arrow buttons . If
adjustable/switchable widgets are on current home screen, you can
press middle button to scroll between them. If adjustable widget is
highlighted, you can change its value by arrow buttons. If switchable
widget is highlighted, you can toggle its state by long press of the
middle button. To enter widget or settings menu, you need to
pull
up the menu bar from the bottom while on any home screen by
long press of the middle button , until menu bar appears. After
that, you can enter into widget menu by pressing the left button ,
or enter into settings menu pressing the right arrow button , or
you can turn off the device by short press of the middle button again.
multi-color light signalization
yellow light
– device is being flashed with new firmware
red light
– device is charging
green light
– device is fully charged
red flash
– battery is less than 20%
yellow flash
– searching for GPS fix
green flash
– GPS 3D fix is acquired
cyan flash
– bluetooth is enabled, but not connected
blue flash
– bluetooth is enabled & connected