Safety notes
We spent lot of time with chasecams development to reach the most stable behavior
in the air. We tested them for several years during normal paragliding flight conditions
without any dangerous situation. However, any official safety tests are missing
(because there is no standard for testing), we did most of SIV maneuvers without any
problem (you can watch the video on our YouTube channel). Even though:
We cannot guarantee your inviolable safety, so every pilot uses SkyBean Chase XC
at her/his own risk. No member of SkyBean team is responsible for non-standard
situations or injuries.
Before each flight, check condition of Chase XC, bungee rope and tension fuse to
prevent losing your gear.
If you don’t fully trust adhesive camera mount on UNI version, we recommend to
secure camera with short line attached through hole in the base plate.
Responsibility for any damages or injuries to third parties is completely covered by
pilot of paragliding glider while using SkyBean Chase XC.
Content of package
● Chase XC with bungee rope
● 2 tension fuse rings
● transport pocket
● sticker
Physical parameters
● weight 150 g (without camera)
● dimensions 30x24x24 cm unfolded
● bungee rope length 6 m
NOTE:
Adhesive camera mount for UNI version is
NOT
included
Contact information
If you have any further questions, please visit our webpage
. Please share your experiences with us, we are looking
forward to your feedback!
rev. 2009
