Sky Sky+HD, Руководство пользователя, Страница: 83 / 119

Get the most from Sky±HD
22
If the set up didn’t work
If you followed the set up carefully but can’t see TV Guide at the end of it, follow these simple steps:
1 Check and make a note of which TV channel you use for watching Sky digital TV.
2 Press tv on your remote.
3 Hold down select and the green
button together until the red light on your remote blinks twice (this is after about 2 seconds).
4 Key in the channel number your TV uses for watching Sky digital TV and press select and hold for 2 seconds . The red light blinks, meaning
the remote settings are made properly.
If your TV’s brand isn’t listed on page 80 , you can try an alternative set up. This involves programming your remote to the TV’s specific model
code instead of the brand code, as follows:
1 First, you need to check the model code for your TV; press interactive , press down then select Sky Customer Service .
Select Programme Your Remote and follow the relevant options until you get to the model code for your model number.
Make a note of the code.
2 Point the remote away from the TV and Sky±HD box and press the tv button.
3 Press and hold the select and red buttons together until the red light blinks twice.
4 Enter the
model code
.
5 Press Sky to complete the set up.
6 Now check the settings; point the remote at the Sky±HD box and press
tv
then number
3
. You should now be able to see a terrestrial
TV channel.
If you have tried these options and still can’t use your Sky±HD remote with your TV, call Sky Customer Service on the number provided in
the
Terms & Conditions document you received with your Sky±HD box.
23
Alternative set up
81