Before each use, an adult should check this product and the LiPo battery to ensure no damage or
hazards exist. Drone has rotating blades that move at high speed, posing danger of damage and
injury. Pilots are responsible for any actions that result in damage or injury from the improper
operation of drone. Adequate flying space is required. Avoid flying near interior fans and/or vents as
they may make flying difficult to control. Keep a safe distance away from streets, public thorough-
fares and power lines. Never attempt to retrieve drone from any location higher than your reach
(such as rooftops or trees) or from any location that poses a safety hazard. Never fly drone at night.
Keep drone in sight at all times during operation. Discontinue operation immediately if drone flies out
of your field of view. Do not fly near spectators or animals. Keep spinning rotors away from fingers,
hair, eyes and other body parts. Always launch from a flat surface. Never leave drone unattended
while it is turned on. Read all enclosed information before operating.
ADULT SUPERVISION REQUIRED
1 Plug in battery on drone.
2 Go to
Wi-Fi network
list on
your smart device.
3 Select a connection similar to
SKYVIPER_ABC123 and connect.
(Note: May take up to 30
seconds to connect.)
4. Enter the password:
viper
5. Open the
Sky Viper Video Viewer
app on
your device.
6. Follow the on-screen icons to connect
with your drone. Once connected you can
record video and take photos on your
device.
7.. You can initiate recording by pressing the
control buttons on your remote.
Download the
Sky Viper Video
Viewer
app for
free. The app
is required
for streaming.
If the drone drifts in any direction while hovering (and you are not pressing the direction stick), you may need to make trim adjustments.
Press the recommended trim button as described below to make adjustments.
Tip 1: When the remote LED flashes 3 times quickly, the trim will revert back to middle of trim range.
Tip 2: If you are uncomfortable trimming the drone in flight, you can land onto a flat surface and make your trim adjustments.
STREAMING AND RECORDING VIDEO WITHOUT HEADSET
NOTE:
Trim adjustments will remain saved until remotes batteries are removed.
TROUBLESHOOTING
ONE TOUCH STUNTS
TRIM ADJUSTMENTS
1 Install the device holder to remote.
2 Pull the device holder arm.
3 Insert a smart device (Devices larger than 3-1/8” wide can be
used but cannot be attached to remote).
ATTACHING YOUR DEVICE
TIP:
It is recommended that you first practice flying and streaming without the headset until you become familiar and confident in your piloting ability.
If you are connected to a smart device through WiFi and wish to
record to Micro SD instead of your device, you can change the
recording setting through the
Sky Viper Video Viewer
app. If
you are not connected to a smart device, recording will be
redirected to Micro SD automatically.
Micro SD slot is located on back
of drone. (card sold separately)
BARREL ROLL
While flying forward (or reverse),
tap the stunt button.
NOTE
:
Once a stunt has been initiated, DO NOT adjust Throttle or press
any other controls until the stunt has been completed.
CAUTION!
The drone should be flying at least 6 feet in the air with a minimum clearance of 6 feet in all directions
before attempting stunt functions.
FLIP
1 Bring the drone to a mid-air
hover without flying in any
direction. Remove finger
from the direction stick.
2 While hovering, tap and
hold the stunt button.
3 Then quickly tap the
direction stick in the
direction you want the
drone to flip.
LIVE STREAMING AND RECORDING
RECORDING TO
MICRO SD CARD
(SOLD SEPARATELY)
• Drone’s blade may have been installed
incorrectly. Reinstall and remember that
the GREEN blades point forward.
• Adjust the trim controls until
drifting ceases.
• Ensure that drone is flying a minimum
distance of 6 feet from the ground with a
minimum 6 feet clearance in all directions.
Drone is
unresponsive
All blades spin, but drone
will not fly properly or
crashes immediately
Drone crashes when
attempting stunt
functions
PROBLEM
SOLUTION
If the drone drifts forward
– Press B button
If the drone drifts backwards
– Press F button
If the drone drifts right
– Press L button
If the drone spins counter-clockwise,
when viewed from the top
– Press button
If the drone spins clockwise,
when viewed from the top
– Press button
Drone drifts in any
direction during flight
without direction from
the remote
• Ensure the remote has fresh batteries
and the LiPo battery is
fully charged.
• Drone may be miscalibrated by
launching from an un-level surface.
Turn the remote off. Turn off the drone
then turn them back on and try again
from a flat, level launching surface.
• Inspect drone for any possible damage.
CAUTION: NEVER WALK AROUND
WHEN WEARING THE FPV HEADSET.
Be aware of your surroundings and
any potential hazards before putting
the headset on. Always use common
sense and good judgement.
USING THE FPV (First Person View) HEADSET
Viewing Sliders
Dividing
Wall
Split Screen
on Phone
• Before inserting your phone, put the headset
on and adjust the straps as necessary to ensure
a snug and secure fit.
• Once adjusted, remove the headset and open
the large face panel.
.
• Power up your drone and select the Sky Viper
Video Viewer app on your smart phone. Follow
the onscreen instructions and select the FPV
viewing option.
.
• With the FPV split screen displayed on your
phone, place your phone into the headset. Stick
the back of the phone to the suction cups with
the split screen facing into the goggles.
• Securely close the front panel, ensuring that
division between the split screens is aligned with
the dividing wall inside the headset. (Phone
cases must be removed before inserting into
headset.)
• Put on the headset and adjust the viewing
sliders located at the top of the goggles until the
image appears clear.
If the drone drifts left
– Press R button
