Sky Sat Mini HD PVR Ready, Руководство пользователя

Страница: 46 / 64

3. Installation
3.1 Dish Setting
Select the satellite/antenna and LNB settings for service se
arch. The values that are set in this menu will be availabl
e for selection in other service searching menus.
z
Satellite : Select the satellite which you want to do a
search for.
- Press the LEFT/RIGHT ARROW button to select the
satellite.
- If you press the OK button, the entire satellite list will be
displayed.
- Select the desired satellite name to search.
- If the desired satellite name is not listed then select User Defined.
z
Frequency : Select the satellite frequency which you want to use for checking the signal.
z
LNB Power : Select the LNB power on or off.
z
LNB Type : Select the LNB type.
z
LNB Frequency : Select the local oscillator (L.O.). frequency that is specified for the LNB used..
- Use the LEFT/RIGHT ARROW buttons to select the LNB frequency.
- If the required LNB frequency is not listed, then enter the frequency manually using the
NUMERIC buttons.
- When you select Universal LNB type, both 9750 and 10600 are supported at the same time.
And then the LNB 22KHz setting is disabled.
z
LNB 22KHz : When you use a separate coax 22 KHz tone switch box, make the 22 KHz tone
switch enabled or disabled to select the input you desire of the tone switch.
z
DiSEqC Switch : If you use DiSEqC 1.0 or DiSEqC 1.1 switch, select one of the DiSEqC inputs.
z
Service Search : Press the OK button to move to the Search Menu
3.2 Positioner Setting
z
Satellite : Select the satellite which you want to search for
the Service.
- Press the LEFT/RIGHT ARROW button to select the
satellite.
- If you press the OK button, a complete satellite list will
be displayed.
- Select the wanted satellite name.
- If the desired satellite name is not listed then select User
Defined.
z
Frequency : Select the satellite frequency you want to use to check for a signal.
z
Positioner : Select the positioner.
- None : (No Positioner)
- Using DiSEqC 1.2 :
Move : To move the dish, press LEFT/RIGHT button.
Fine Move : To move the dish in smaller steps, press the
LEFT/RIGHT ARROW button.
Step : Set to positioner moving steps as 1, 2, 3, 4
Positioner Command : To use various positioner
commands, press the OK button. Then, available
positioner commands will appear.
46
www.skysat.bg