background image

reedinstruments

www

com

12

Pantone 534 Blue

Pantone 123 Yellow

Pantone 485 Red

Pantone 123 Yellow

Pantone 534 Blue

Black

Rich Black - 

20/20/20/100

Blue -  100/80/30/5

Yellow - 0/27/100/0

Red - 10/100/100/5

Yellow - 0/27/100/0

Blue -  100/80/30/5

Only if you REALLY need them:

Pantone 534 Blue -  100/80/30/5

Pantone 485 Red - 10/100/100/5

Pantone 123 Yellow - 0/27/100/

Current Measurement

1. Press the arrow A button.
2. The display will show the current unit of measure, A or mA. You can 

now measure the current of the conductor.

3. Read the measurement value on the display.
4. If the display shows the OL symbol, this indicates the measured  

value exceeds the measurement range.

continued ...

Buzzer ON.

A loop ground resistance of 93.7Ω.

The battery life is at 18%.

At less than 20% the batteries need 

to be replaced. Auto power off has 

been enabled. There are 6 recorded 

values in the memory.

Buzzer ON.

The current in the grounding loop has 

been disturbed, the reading is 55.2Ω, 

however the resistance measurement 

could have been affected. The battery 

life is at 86%.

www.reedinstruments.com

1-877-849-2127 | [email protected]

 

Содержание MS2301





















Отзывы: