sky rider DRC376, Руководство пользователя

Страница: 14 / 24

14
Pre-Flight Calibration
Step 4
Push the Left Control Stick directly
forward, wait for a chime to sound, then
pull the stick directly backward, and wait
for a second chime.
When this last chime has sounded,
the craft is calibrated and ready to fly.
Step 5
Attempt a stable hover, low to the
surface you started on. If you notice
a tendency to drift, you may need to
adjust the trim controls to fine tune the
handling (see Trim Adjustment, pg.15).
When You’re Done Flying...
After safely landing, keep the throttle in the lowest position (OFF) and wait for the
rotors to stop spinning.
Power OFF the remote first.
This will ensure that no signals
are accidentally sent to the craft, reducing the chance of injury. After this is done, it is
safe to pick up and power OFF the craft.