Sky media S15/7, Руководство пользователя

Страница: 7 / 24

5
The TV channels will now tune in. After a few minutes,
tuning in will finish and the TV will go into ‘Program Edit’
mode where you can move channels to the desired
positions.
5) Scroll to select the channel you would like to
move/swap, then press the yellow button.
6) Move to the location you would like the channel
and press the red button
Repeat the process with all channels.
To rename the channels, refer to page 10.
Press [MENU] 3 times to exit.
IMPORTANT - AFTER TUNING DO NOT PRESS ANY BUTTONS FOR 20 SECONDS SO THE CHANNEL
INFORMATION CAN BE STORED.
GETTING STARTED - INITIAL SET UP
TUNING IN
IMPORTANT
— Please ensure the TV has
reached room temperature before
connecting the power for the first time
1) Connect the mains lead to your electrical outlet
and connect the power adaptor to the television.
2) Connect the RF Cable supplied to the
'RF IN ' on the rear of the TV and connect
the other end of the cable to your TV Aerial
outlet
3) Install batteries in the remote control and press
the [POWER] button to turn on the TV.
The initial Set up screen will appear as below
4) Once you have read the on screen message and
checked that you have connected the RF cable
to the ‘RF-IN’ on the rear of the TV, ensure
‘Yes’ is highlighted and press [MENU].