11
Remove the knuckles and mount the upper frame.
Use M4*40mm buttonhead in rear outer hole for fixing
canopy standof.
Screws used: PT 2,9*13mm, M4*40mm cone head +
knuckel, M4*40mm buttonhead
-
12
Remove the 4 first M4*40 screws, mount them in the right
direction.
Screws used: M4 lo M4 shims
-
12
TIP
Tip : Use the correct hole depending on your frame size.
13
Mount your inertic plate.
Screws used: M4 red knuckle
Assembly instructions Spyder / Kits SKH00-401, SKH00-402 & SKH00-403 /
Page 4
/5
