Sky Angel AMX, Сборка и руководство по эксплуатации, Страница: 12 / 12

Assembly and Operating Manual
12
Test Flying - Notes on flying the airplane
Please read the sections entitled “Routine pre-flight checks” and “Flying
the model” in the Safety Notes before attempting to fly the AMX Jet for the
first time.
- For the first flight you should wait for a relatively calm day with no more than
a gentle breeze.
- A good flying site is a large, flat, open field; well away from trees, fences,
high-tension overhead cables and other potentially dangerous obstacles.
- Carry out a complete check of the working systems.
- We recommend that you ask an experienced modeler to help you initially; to
give the model a fairly powerful hand-launch.
- The model must be launched directly into any existing wind.
- Switch the motor on, and launch the airplane strongly into the wind, with the
fuselage and wings level.
- Allow the AMX Jet to fly straight and level initially; don’t try to turn it when it is
close to the ground.
- Adjust the trims if necessary so that the model settles into a steady climb.
- Check the model’s response to control commands from the transmitter. You
may need to increase or reduce the control surface travels once the model
is back on the ground.
- Take the airplane up to a safe height and check its stalling speed.
- Keep the speed well up on the landing approach to avoid stalling.
- If you had to move the trims during the flight, correct the mechanical
linkages before flying again. This allows you to re-centre the trims, so that
full trim travel is available for subsequent flights.
- We reserve the right to introduce technical modifications and suggest that
you check our website for updates.
Jiangyin Skyangel Electronic Technology Co., Limited.
5th Floor, A3 Building, Xinjianxing Technology Industrial Park, Fengxin Road,
Guangming Town, Bao'an, Shenzhen City, 518107 China
Phone: +86 755 33699201
Fax: +86 755 33699203
www.skyangelrc.com