manualshive.com logo in svg

SKY Agriculture Vision II DUO, Оригинальное руководство пользователя, Страница: 2 / 66

Поделиться
Скачать
SKY Agriculture Vision II DUO Скачать руководство пользователя страница 2

•  Ces symboles sont utilisés dans cette notice chaque fois que des recommandations concernent votre sécurité, celle 

d’autrui ou le bon fonctionnement de la machine.

•  Transmettez impérativement ces recommandations à tout utilisateur de la machine.

Risque d’accident

Risque d’endommager 

la machine

Faciliter le travail

Consignes de sécurité
Safety instructions
Sicherheitsvorschriften

Ne pas jeter le boîtier

  • Follow the instructions contained in this manual.
  • Follow the Seed drill User Manual recommendations.
  • Never leave the driver’s position whilst the tractor is running.
  • Carry out Seeddrill  adjustments with the tractor stopped.
  • Make sure no one is near the machine before calibrating the VISION DUO unit.

•  These symbols are used in these instructions every time recommendations are provided concerning your safety, the 

safety of others or the correct operation of the machine.

• These recommendations must be given to all users of the machine.

Risk of accident

Risk of damage  

to the machine

Operating tip

  • Die Anweisungen dieser Anleitung einhalten.
  • Die Anweisungen des Benutzerhandbuchs der entsprechenden Drillmaschine einhalten.
  • Den Führerstand niemals bei laufendem Schleppermotor verlassen.
  • Einstellungen des Drillmaschine bei ausgestelltem Schlepper vornehmen.
  • Darauf achten, dass sich beim Kalibrieren des VISION DUO niemand im Maschinenbereich aufhält.

•  Diese Symbole werden in dieser Anleitung jedes Mal dann benutzt, wenn Empfehlungen für Ihre und anderer Per-

sonen Sicherheit oder den einwandfreien Betrieb der Maschine gegeben werden.

•  Es ist unerlässlich, diese Empfehlungen an alle Benutzer der Maschine weiterzugeben.

Unfallgefahr

Gefahr, die Maschine zu 

beschädigen

Arbeitserleichterung

  • Respecter les instructions de cette notice.
  • Respecter les instructions du manuel d’utilisation du semoir correspondant.
  • Ne jamais quitter le poste de conduite lorsque le tracteur est en marche.
  • Réaliser les réglages du Semoir tracteur à l’arrêt.
  • Assurez-vous qu’il n’y ait personne autour de la machine avant d’effectuer l’étalonnage de la console VISION DUO.

Do not throw the 

unit away

Elektronikgerät nicht 

im Müll entsorgen

FR

EN

DE

2

Содержание Vision II DUO



































































Отзывы:

Нет отзывов