Page 2 of 4
2- Connect the short modular
cord [1&2 Phone on CK-1] to
[LINE 1/2 on Phone].
3- Connect the audio cord from
your audio source, to the
AUDIO IN jack on the back of
the CK-1 box. For DIGITAL
PLAYERS use the cable that
comes with the player.
4- Connect a MOD cord from
Telephone Wall Jack 1&2 to
[1&2 Line on CK-1].
5- Make sure that the surface area
of the base phone, where the
sensor board is to be mounted, is
clean and free of all dust and oil
film. Locate the CK-1P4
"SENSOR BOARD", peel off the
green/white protector papers from
the bottom of the sensor board,
and carefully place it OVER the
LINE 1 and LINE 2 lights on the
Panasonic base set as shown in
Fig. 2 and Fig. 3. Make sure that
you align the SILVER DOTS on
the Sensor Board, directly over
the IN-USE lights on the phone.
6- Connect the Sensor Cable to
the Sensor Board as shown in Fig.
4.
7- Connect the POWER CUBE
from the CK-1 Black Box to
115VAC power. That's it!
Testing the System:
1- Pickup line 1 on your
telephone. The No."1" LED on
the CK-1P4 Sensor Board should
Align by centering Silver Dots
over IN USE lights on phone.
Silver Dots
IN-USE
Lights
Fig. 2
Fig. 3
Sensor Board Mounted
Fig. 4
